Page 1 of 1

2003 4motion cel

Posted: Fri Jan 29, 2016 8:02 pm
by saintmoody
Yay I got some new codes for this week to ponder... p0441, p0300 thoughts and experience would be awesome, thanks!

Re: 2003 4motion cel

Posted: Mon Feb 01, 2016 2:30 pm
by gfmatthe
Ross-Tech site:

16825/P0441/001089 - EVAP Emission Control Sys: Incorrect Flow
Possible Symptoms

Malfunction Indicator Light (MIL) active

Possible Causes

Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80) faulty/jammed
Evaporative Emission (EVAP) Canister Purge Solenoid Valve (N115) faulty/jammed
Evaporative Emission (EVAP) Canister Sealing faulty
Pipes between Tank Breathing and Throttle Body leaky/blocked

Possible Solutions

Check Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80)
Perform Output Test
Check Evaporative Emission (EVAP) Canister Purge Solenoid Valve (N115)
Check Evaporative Emission (EVAP) Canister
Perform Basic Setting
Check Pipes between Tank Breathing and Throttle Body

Special Notes

When found in the NAR 1.8T Audi A4 1.8T check TSB 24-08-78 or 2010268/3 or Pass-Thru equivalent TSB
When found in the NAR 1.8T VW Passat 1.8T check TSB 01-09-09 or 2005554 or Pass-Thru equivalent TSB
Note: The Passat 26E5 or "R5" recall includes the same software update
Make sure the quick release lines for the N80 valve and vacuum line to LDP are not crossed.
This can also make the engine hard to start after filling up the fuel tank.

16684 P0300

Random/Multiple Cylinder Misfire Detected

Good luck.
Gary.

Re: 2003 4motion cel

Posted: Thu Feb 04, 2016 12:22 pm
by saintmoody
thanks for the definitions... more looking for others with same code combo and fixes that worked. Now the car will not start so I gotta go deeper.